Lynn Westward BG 2

For Audio Visual

With QMotion UK's unique offering, the integrator no longer has to concern themselves with adopting a hard wiring strategy for the shades installation.

With QMotion UK you can integrate almost all the recognised branded third party drivers to operate the shades with your system.

The QMotion UK motorised shading system can also be used for projection screen purposes by adding an applicable fabric you can provide a wireless QMotion UK Projection screen into your home or office without the need for any power or control wiring.

The shades themselves have quiet motors and a unique manual override and yes they come with an encoded motor that automatically works out where the shades intermediate and aligned stop positions need to be placed. If the positioning not does not suit your client requirements no problem you can manually override these and set new custom positions to suit almost every requirement with out the need for any specialist programing at all.

Stand alone control options include a PC programmed timer remote function that allows the user up to six events per day. The user can therefore be assured that whilst they are away from their home the shades will continue to operate, providing glare and heat gain control whilst at the same time offering a level of privacy and security.

With unique inbuilt technology, the QMotion UK shade also provides a dual control feature that allows the user to operate the shade manually. By simply tugging the bottom bar you can lower the shade or send the shade back up to either its last pre-set position or to a fully raised position, bringing a new level of convenience to shade controls.

Power for the shade is provided by standard readily available alkaline D cell batteries. Due to the special counter balancing springs installed within the Roller tube itself the batteries provide up to 5 years usage based on an average 4 daily fully raise/fully lower movement changes.

Easy Battery Replacement - By placing the access port for the readily available alkaline D cell batteries in the shade tube wall, you can now change the batteries without having to remove the shade from the brackets.

Easy Fabric Removal and Installation - The spline that attaches the roller shade fabric to the tube permits the fabric to be easily removed for cleaning, maintaining and sanitising or replacement.

If you want to change your fabric for decorative reasons your QMotion UK Distributor can order a new QMotion UK fabric for use on your existing hardware providing unique longevity and return on investment from your window covering.

Please ask your Authorised Distributor to show you our full range of fabrics that are available for use with the system.

  • 100% Wireless

    Qmotion is battery powered and can be remote controlled, so there are no wires to install or complicated building works.

    100% Wireless

    QMotion UK are the industry leaders when it comes to a wireless shading system. With no power wires or control wires required at all, the user can install a fully motorised and intelligently controlled shading system without the need for using any electricians. For the first time there really is a system by which you can use motorised shades without the need for chasing out walls or installing unsightly surface mounted conduits to hide the wiring.

  • Remote Control

    The cool QMotion multi-function remote control allows you to control one or multiple blinds at once.

    Remote Control

    QMotion UK Remote Controls are offered in standard white finish and are designed for easy set up and operation. We offer two types that can either operate a single shade or if more than one shade is installed a multi control remote can be used. Other remote control accessories that can be purchased are easy install flush mounted plates, which can be fixed to your walls and will hold the remote you have selected by magnet to the flush mounted plate.

  • iPhone / Android

    Got a smart phone, or tablet? You can control your blinds using the QMotion app.

    iPhone / Android

    QMotion UK can offer an app for both smart phone and or tablet which can be downloaded in either IOS or android formats. For the app to work and recognise the fact that QMotion UK shades have been installed, the user needs to install a Qsync into their Wi-Fi router. Once the QMotion app of choice is downloaded all the shades can then be addressed individually and if required grouped together, therefore providing an excellent and easy to use platform in which the shades can be operated.

  • Virtually Silent

    Unlike conventional motorised shades, QMotion technology allows for near-silent operation.

    Virtually Silent

    QMotion UK motors are almost silent, ensuring that when the shades are operated, that there will be virtually no motor noise that will interrupt or disturb the ambient noise in the room or area to which the shades or blinds are installed. This leaves the user with a pleasant experience when operating the shades and therefore no unnecessary attention is drawn to the window due to excessive motor noise.

  • Easy Setup

    No wires or switches to install means installation is as easy as fitting any other window blind.

    Easy Setup

    Once your brackets are installed to your intended fixing points, and you have located the blind into the brackets. QMotion UK blinds are really are easy to set up. By following the instructions contained with every blind the 'SET' will take no longer than a few minutes, and you will have your shade working and fully operational. And yes we even install the batteries within the tube just to make the time from out of the box to operation just that little bit shorter.

  • 5 Year Batteries

    Based on four operations per day, the batteries last 5 years, and are a breeze to replace.

    5 Year Batteries

    QMotion Shades come complete with pre installed readily available standard Alkaline D cell batteries. The battery life is dependant on the size of the shade and the amount of operations carried out on a daily basis. However based on a standard sized shade and alongside our fully vetted testing procedures we would suggest that it will work for up to 5 years with out the need for replacing batteries based on 4 fully up/down operations per day.

Integration & Extras

The ability to control shades from a central point has become the new normal for todays advanced shading systems. We at QMotion UK are pleased to be able to offer the ability to operate blinds to suit all most every requirement. Below are our integration modules that once installed can provide single, grouped and 'all' control of the shades installed in your property.

  • Qconnect for Home or Building Automation Systems

    Qconnect for Home or Building Automation Systems

    The AV specialists' favourite module for operating Qmotion UK Shades. With most of the leading integration partners already providing drivers for QMotion UK shades it's really easy, after 'LEARNING' your shades to the Qconnect. Plug it into your preferred method of operating system at the rear of the box which offers either dry contact, RS232 or RS485 protocols. Qconnect includes its own battery therefore allowing the integrator the ability to unplug and 'LEARN' more shades on new channels if the user requires this. Qconnect really is a one stop box leaving providing a simple solution to control a your QMotion shading system via a third party interface.

  • Qsync for Properties where there is no Home or Building Automation System

    Qsync for Properties where there is no Home or Building Automation System

    QMotion UK are pleased to introduce the Qsync operating system whereby the user can plug the Qsync via the Ethernet supplied cable into a spare LAN port at the back of their existing Wi-Fi Router. The user can then download the Qmotion app on their smart phone or tablet to find the applicable Wi-Fi network. Once the network is found it is possible to address all the shades to operate them either individually by room, by group, by elevation or indeed by all. This is an excellent format by which a user without a home automation system can operate their shades.

  • Qrelay

    Qrelay

    With Qrelay, you can be assured that your control is complete, even in areas or sites where reception may not be the best. Just add Qrelay to ensure that a signal reaches your QMotion UK shades, wherever they are located:

    • Use as many as you need; Unique design code technology ensures no cross interference between devices.
    • Two modes of operation to suit your preferences.
      • Zone specific mode allows two different remotes to be learned to the repeater.
      • Echo mode repeats all valid QMotion remote commands.
    • Plugin wherever you have an 240V outlet, or into a properly powered USB port.

    Qrelay extends the capability of QMotion UK shades by assisting signal transmission and reception when needed and is compatible with all QMotion transmitters.